COLLOSUS N
Enduro | 170mm Travel | ACX Carbon & ALX Alloy | 29" Wheels
FAQ
-
The bike comes with 29x2.6” tires front and rear. Can I fit 27.5” wheels to convert it to a ‘mullet’ set up?
The frame has clearance for a 27.5x2.8" tire so a mullet (29” front, 27.5+ rear) is possible. However, the diameter of a 27.5x2.8" tire is significantly smaller than the standard 29x2.6" tire, hence changing to a mullet set up would reduce BB height and pedal to ground clearance while also slackening both the effective seat and head tube angles.
-
Can I use a different rear shock?
-
Can I change the fork?
The fork will also fit a 27.5+ tire, however, this is highly discouraged as the BB drop would become dangerously low. We recommend staying ready for business with 29" all-round.
-
Can Collosus N9 fit a chain guide?
Most 230mm x 65mm Trunnion Mount shocks should fit. The leverage curve can work well with a coil shock. However, it’s worth noting that Polygon have Fox tune the stock rear shocks to work best with the specific bike model, so a standard tune replacement shock may not offer optimized performance.
-
What size rotors can I use?
The standard forks are 170mm travel, you cannot use a dual crown fork as the frame is not designed or tested to withstand the different loads.
-
What is included in the standard warranty? Click here for more details.
For sure, the bike comes equipped with an e13 TRS+ Bashguard. The chain guide mounts directly to the drive unit and the bolt pattern is different to traditional ISCG/05, so most ‘normal’ chain guides are not compatible.